rfc.dk

RFC 10063

Near Real Time Mirroring (NRTM) Version 4

RFC 10063 is a Proposed Standard published in November 2026 in the IETF stream by the grow working group.

Proposed Standard IETF stream grow WG Operations and Management

Citations
Cites 20 RFCs

Abstract

This document specifies Near Real Time Mirroring version 4 (NRTMv4): a one-way synchronization protocol for Internet Routing Registry (IRR) records. NRTMv4 is based on files that are distributed over HTTPS. The protocol allows instances of IRR Database servers to mirror IRR records, specified in the Routing Policy Specification Language (RPSL), between each other.

Plain text 58 KB · rfc-editor.org · Datatracker · doi:10.17487/RFC10063 · draft-ietf-grow-nrtm-v4-11

Internet Engineering Task Force (IETF)                         S. Romijn
Request for Comments: 10063                               Reliably Coded
Category: Standards Track                                    J. Snijders
ISSN: 2070-1721                                                      BSD
                                                              E. Shryane
                                                                RIPE NCC
                                                         S. Konstantaras
                                                                  AMS-IX
                                                           November 2026


               Near Real Time Mirroring (NRTM) Version 4

Abstract

   This document specifies Near Real Time Mirroring version 4 (NRTMv4):
   a one-way synchronization protocol for Internet Routing Registry
   (IRR) records.  NRTMv4 is based on files that are distributed over
   HTTPS.  The protocol allows instances of IRR Database servers to
   mirror IRR records, specified in the Routing Policy Specification
   Language (RPSL), between each other.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   https://www.rfc-editor.org/info/rfc10063.

Copyright Notice

   Copyright (c) 2026 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Revised BSD License text as described in Section 4.e of the
   Trust Legal Provisions and are provided without warranty as described
   in the Revised BSD License.

Table of Contents

   1.  Introduction
   2.  Overview
   3.  Terminology
     3.1.  Requirements Language
   4.  Mirror Server Use
     4.1.  Key Configuration
     4.2.  Snapshot Initialization
     4.3.  Publishing Updates
       4.3.1.  Delta Files
       4.3.2.  Snapshot Files
       4.3.3.  Update Notification File
       4.3.4.  Publication Policy Restrictions
   5.  Mirror Client Use
     5.1.  Client Configuration
     5.2.  Update Notification File Retrieval
     5.3.  Initialization from Snapshot
     5.4.  Processing Delta Files
     5.5.  Error Recovery
     5.6.  Signature and Staleness Verification
     5.7.  Policy Restrictions
   6.  Update Notification File
     6.1.  Purpose
     6.2.  Cache Concerns
     6.3.  Payload Format and Validation
     6.4.  Encoding and Signature
   7.  Snapshot File
     7.1.  Purpose
     7.2.  Cache Concerns
     7.3.  File Format and Validation
   8.  Delta File
     8.1.  Purpose
     8.2.  Cache Concerns
     8.3.  File Format and Validation
   9.  Operational Considerations
     9.1.  Time
     9.2.  IRR Object Validation
     9.3.  Intermediate Mirror Instances
     9.4.  Reading from Local Files
     9.5.  Storage Considerations
     9.6.  Public Key Rotation
     9.7.  Scalability
     9.8.  NRTMv3 Compatibility
   10. IANA Considerations
   11. Security Considerations
   12. References
     12.1.  Normative References
     12.2.  Informative References
   Acknowledgments
   Authors' Addresses

1.  Introduction

   The Internet Routing Registry (IRR) consists of several IRR
   Databases, each representing objects in the Routing Policy
   Specification Language (RPSL) [RFC2622].  About a dozen larger IRR
   Databases are well known and widely used, operated by different
   organizations such as Regional Internet Registries and some large
   network operators.  IRR objects serve many purposes ranging from
   manual research by operators to automated network configuration and
   filtering.

   Most of these well-known IRR Databases mirror IRR objects from some
   others so that queries run against these instances provide a
   comprehensive view.  Some parties also mirror IRR Databases to
   private IRR server instances to reduce latency when replying to
   queries, analyze IRR objects, or other purposes.

   NRTM version 4 (NRTMv4) is a protocol for IRR mirroring and is
   designed to address issues in existing IRR Database mirroring
   protocols.  In NRTMv4, IRR Databases publish their records on an
   HTTPS [STD97] endpoint with periodic Snapshot Files and regular Delta
   Files.  Signing allows integrity checks.  By only generating files
   once and publishing them over HTTPS, scalability is improved.  NRTMv4
   borrows some concepts from the Resource Public Key Infrastructure
   (RPKI) Repository Delta Protocol [RFC8182], as there are overlaps
   between the two protocols.

   Reliable and secure distribution of IRR data is important for global
   routing operations since network operators depend on IRR objects for
   route filtering and network configuration.  Prior mirroring protocols
   lack integrity verification, have no formal specification, and scale
   poorly.  NRTMv4 addresses these shortcomings by providing a formally
   specified, scalable, and integrity-protected mirroring protocol.  Of
   earlier NRTM versions, none were formally specified, but NRTMv3
   [NRTMv3] was widely deployed.  Some comparisons are made in
   Section 11.

2.  Overview

   In NRTMv4, a mirror server is an instance of IRR Database software
   that has a database of IRR objects and makes them available on an
   HTTPS endpoint to allow mirroring by others.  These objects can be
   retrieved by mirror clients, which then load them into their local
   storage.

                               Mirror Server
                              +--------------+
                              | IRR Database |
                              +------+-------+
                                     |
                 +-------------------+-------------------+
                 |                   |                   |
             periodic                |               on change
                 |                   |                   |
                 v                   v                   v
           +------------+      +-----------+      +------------+
           |  Snapshot  |      |  Update   |      |   Delta    |
           |    File    | refs |   Notif.  | refs |  File(s)   |
           |   (all     |<-----|   File    |----->| (changes   |
           |  objects)  |      |  (index)  |      |   only)    |
           +-----+------+      +-----------+      +-----+------+
                 |                   |                  |
                 |          +--------+--------+         |
                 +--------->+  Mirror Client  +<--------+
                   initial  | Local Database  |   update
                            +-----------------+

                     Figure 1: NRTMv4 Protocol Overview

   Publication consists of three different files:

   *  A single Update Notification File.  This specifies the current IRR
      Database version and locations of the Snapshot File and Delta
      Files.  It is signed to allow verification of the authenticity of
      the Update Notification File.

   *  A single active Snapshot File.  This contains all published IRR
      objects at a particular version.  The mirror server periodically
      generates a new snapshot.

   *  Zero or more Delta Files.  These contain the changes between two
      Database versions.

   The Update Notification File MUST be in the JSON Web Signature
   [RFC7515] format, where the payload is in JSON format [RFC8259].  The
   Snapshot File and Delta Files MUST be in the JSON Text Sequences
   [RFC7464] format so that each object in large files can be parsed
   independently.  Files MAY be compressed with GZIP [RFC1952].

   Mirror clients initially retrieve the small Update Notification File
   and a Snapshot File from which they initialize their local copy of
   the Database.  After that, mirror clients only retrieve the Update
   Notification File periodically, typically every minute, to determine
   whether there are any changes, and then retrieve only the relevant
   Delta Files, if any.  This minimizes data transfer.  Deltas have
   sequential versions.

   Mirror clients are configured with the URL of an Update Notification
   File, the name of the IRR Database, and a public signing key.  This
   public key is used to verify the Update Notification File, which, in
   turn, contains hashes of all the Snapshot and Delta Files.

   Upon initialization, the mirror server generates a session identifier
   (session_id) for the Database (Section 4.2).  This allows long-term
   caching and is used by the client to determine that the Delta Files
   continue to form a full set of changes allowing an update to the
   latest version.  If the mirror server loses partial history or the
   mirror client starts mirroring from a different server, the
   session_id change will force a full reload from the latest Snapshot
   File, ensuring there are no accidental mirroring gaps.

   Mirror servers can use caching to reduce their load, particularly
   because snapshots and deltas are immutable for a given session_id and
   version number.  These are also the largest files.  Update
   Notification Files may not be cached for longer than one minute, but
   are fairly small.

   Note that in NRTMv4, contiguous version numbers are used for the
   Database version and Delta Files.  This is different and unrelated to
   the serial in NRTMv3.  NRTMv3 serials refer to a single change to a
   single object, whereas an NRTMv4 version refers to one delta,
   possibly containing multiple changes to multiple objects.  NRTMv3
   serials can also contain gaps, NRTMv4 versions do not.

3.  Terminology

   IRR Database:  A logical collection of IRR objects represented in
      RPSL, grouped by the value in their "source" attribute.  That
      value is the name of the IRR Database.  No particular storage
      technology is implied.

   Snapshot File:  A file that reflects the complete contents of the IRR
      objects in an IRR Database at a particular point in time.

   Delta File:  A file that contains all changes for exactly one
      incremental update of the IRR Database.

   Update Notification File:  A file generated by the mirror server and
      used by mirror clients to discover which changes exist between the
      state of the IRR mirror server and of the mirror client.

   Mirror Server:  An instance of IRR Database software that has a
      database of IRR objects and makes them available for retrieval on
      an HTTPS endpoint, to allow mirroring by others.

   Mirror Client:  An instance of IRR Database software that retrieves
      IRR objects from a mirror server and loads them into its local
      storage.

   Version:  A monotonically increasing positive integer, scoped to a
      session_id, that identifies a particular state of the IRR
      Database.

3.1.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

4.  Mirror Server Use

4.1.  Key Configuration

   When enabling NRTMv4 publication for an IRR Database, the operator
   MUST generate a JSON Web Key [RFC7517] pair and configure the private
   key in the mirror server.  The operator then provides the
   corresponding public key, the name of the IRR Database, and
   publication URL of the Update Notification File to any operators of
   mirror clients.  The published public key MUST be encapsulated
   following Textual Encoding of Subject Public Key Info Section 13 of
   [RFC7468], sometimes referred to as "PEM encoding".  The process for
   providing this is not in the scope of this protocol, but a typical
   case is publication on the operator's known website.  Key rotation is
   described in Section 9.6.

   It is RECOMMENDED that implementations provide easily accessible
   tools for operators to generate new signing keys to enter into their
   configuration and assist with key rotation.  All configuration
   options SHOULD be clearly named to indicate that they are private
   keys.  Clear naming reduces the risk of operator error causing
   accidental exposure.

4.2.  Snapshot Initialization

   A mirror server MUST follow the initialization steps upon the first
   export for an IRR Database by that mirror server, or if the server
   lost history and can not reliably produce a continuous set of deltas
   from a previous state.

   In other words, either the mirror server guarantees that clients
   following the deltas have a correct and complete view, or the mirror
   server must reinitialize, which will force clients to reinitialize as
   well.

   Initialization consists of these actions:

   *  The mirror server MUST generate a new session_id.  This MUST be a
      Universally Unique Identifier version 4 (UUIDv4) (Section 5.4 of
      [RFC9562]) and MUST be the same across all client sessions.  The
      session_id is unique to the IRR Database, so an instance that
      serves multiple IRR Databases will create a separate session_id
      for each.

   *  The server MUST generate a snapshot for version number one.  This
      may contain an empty array of objects if the IRR Database is
      currently empty.

   *  The server MUST generate a new Update Notification File with the
      new session_id, a reference to the new snapshot, and no deltas.

   Note that a publication, and its associated session_ids and versions,
   always relates to a single specific IRR Database, even if multiple
   databases are published from one instance.  For example, a mirror
   server that serves two IRR Databases named EXAMPLE and EXAMPLE-
   NONAUTH will generate two Update Notification Files, referring to two
   Snapshot Files and two sets of Delta Files.  Each set of Delta Files
   has contiguous version numbers.  The two publications are completely
   independent of each other, with different session IDs, and may be
   published at different times.  This applies even if the same IRR
   server instance produces both.

4.3.  Publishing Updates

   After creating the initialization files, the mirror server processes
   updates by generating Delta Files and, periodically, a new Snapshot
   File, and placing them on the HTTPS endpoint.

4.3.1.  Delta Files

   Changes to IRR objects MUST be recorded in Delta Files.  One Delta
   File can contain multiple changes.

   Updates are generated as follows:

   *  A mirror server MUST publish a Delta File approximately every
      minute if there have been changes to IRR objects in that time
      frame.

   *  If a mirror server is lagging in production of Delta Files, such
      as after an initialization or server downtime, it MUST generate
      one larger "catch up" Delta File rather than individual Delta
      Files for every one-minute window.

   *  A new Delta File MUST be generated with a new version, one greater
      than the last Delta File version, or one greater than the last
      Snapshot File version if there were no prior deltas at all.

   *  The Delta File MUST include all changes that happened during the
      time frame in the order in which they occurred.  If multiple
      changes have occurred within the time frame that would cancel each
      other out, like an addition and immediate deletion of the same
      object, the mirror server MUST still include all these changes.

   *  The URL where the Delta File is published MUST contain the session
      ID and version number so that the content at a given URL is
      immutable and can be cached indefinitely by HTTP intermediaries.
      It MUST also contain a random value that can not be predicted
      before publication to counter negative caching issues.

   *  The Update Notification File MUST be updated to include the new
      Delta File.

   *  References to Delta Files older than 24 hours SHOULD be removed
      from the Update Notification File.  This limits the potential
      length of the Delta chain that clients must process, where a
      Snapshot refresh may be more efficient, while also preventing
      overly frequent Snapshot reloads.  However, a mirror server MUST
      NOT remove references to Delta Files with a version higher than
      the current Snapshot File version, as this would leave clients
      with no path from the snapshot to the current state.  Refer also
      to Section 9.5.

   *  Note that, as Delta Files always contain changes compared to a
      previous state, there can never be a Delta File with version 1.

   Mirror servers with high object churn are RECOMMENDED to generate new
   Snapshot Files more frequently than the required minimum to limit the
   length of the Delta chain that clients must traverse on
   initialization or after a gap.  Long Delta chains increase
   initialization time and resource consumption for mirror clients.

4.3.2.  Snapshot Files

   Snapshot Files after initialization are generated as follows:

   *  If there have been no changes to the IRR objects since the last
      snapshot, the mirror server MUST NOT generate a new snapshot.

   *  The mirror server MUST generate a new Snapshot File at least once
      per day if there have been changes to the IRR objects.  Mirror
      servers should not generate new Snapshot Files more than once per
      hour, as snapshot generation can be resource-intensive.

   *  The version number of the new snapshot MUST be equal to the last
      Delta File version at the time the server begins generating the
      snapshot.

   *  The URL where the Snapshot File is published MUST contain the
      session ID and version number so that the content at a given URL
      is immutable and can be cached indefinitely by HTTP
      intermediaries.  It MUST also contain a random value that can not
      be predicted before publication to counter negative caching
      issues.

   *  The Update Notification File MUST be updated to include the new
      snapshot if one was generated.

   *  Snapshot generation may take some time, and in that time, newer
      changes may occur that are not part of the snapshot in progress.
      The mirror server MUST continue to produce Delta Files during this
      window.  This means that the server may publish a Snapshot File
      with a version number older than the most recent Delta File at the
      time of publication.

4.3.3.  Update Notification File

   The Update Notification File MUST be updated when a new Delta or
   Snapshot File is published and at least every 24 hours, even if there
   have been no changes.  The full format and validation rules are
   specified in Section 6.

4.3.4.  Publication Policy Restrictions

   A mirror server MAY have a policy that restricts the publication of
   certain IRR objects or attributes, or modifies these before
   publication.  Typical scenarios for this include preventing the
   distribution of certain personal data or password hashes, or
   excluding objects which do not meet validation rules like RPKI
   consistency.  If objects are modified, it is RECOMMENDED that the
   mirror server makes it evident to humans reading the object text that
   the object was modified, for example, by adding remark lines or
   comments.

   Mirror servers are RECOMMENDED to remove password hashes from the
   auth lines in mntner objects, as they have little use beyond the
   authoritative server and their publication may be a security risk.

   If a mirror server has a policy that restricts or modifies object
   publication, this MUST be applied consistently to Snapshot Files and
   Delta Files from the moment the policy is enacted or modified.

5.  Mirror Client Use

5.1.  Client Configuration

   Mirror clients are configured with the name of the IRR Database, the
   URL of the Update Notification File, and the public key currently
   used for signing the Update Notification File.  Key rotation is
   described in Section 9.6.

5.2.  Update Notification File Retrieval

   Mirror clients may retrieve the Update Notification File to check for
   changes every minute.  Mirror clients MUST NOT check more than once
   per minute.

5.3.  Initialization from Snapshot

   Clients MUST initialize from a Snapshot File when initially
   configured, or if they are not able to update their local data from
   the provided Delta Files:

   *  The client MUST retrieve the Update Notification File.

   *  The client MUST verify that the source attribute in the Update
      Notification File matches the configured IRR Database name.

   *  The client MUST retrieve the Snapshot File and load the objects
      into its local storage.

   *  The mirror client MUST verify that the calculated SHA-256 [SHS]
      hash of the Snapshot File matches the hash in the Update
      Notification File that referenced it.  If the Snapshot File was
      compressed with GZIP, the hash MUST match the compressed data.  As
      the Update Notification File is signed, this hash verification
      proves the integrity and authenticity for the Snapshot File.  In
      case of a mismatch of this hash, the file MUST be rejected.

   *  The client MUST record the session_id and version of the loaded
      Snapshot File.

   *  The file MUST be rejected if an Update Notification File or a
      Snapshot File has an invalid syntax (e.g., missing mandatory
      parameters).  For validating the IRR objects contained in the
      files, see Section 9.2.

5.4.  Processing Delta Files

   If a mirror client has previously initialized from a snapshot:

   *  The client MUST retrieve the Update Notification File.

   *  The client MUST verify that the source attribute in the Update
      Notification File matches the configured IRR Database name.

   *  The client MUST verify that the session_id matches the previously
      known session_id.  If this does not match, the client MUST
      reinitialize from the snapshot.

   *  The client MUST verify that the Update Notification File version
      is the same or higher than the client's current most recent
      version.  If not, the Update Notification File MUST be rejected.
      It is RECOMMENDED for the client to distinguish between an Update
      Notification File that is a single version older, and a much older
      version, in any status messages.  The former can occur from time
      to time in synchronization issues and the latter is more likely a
      faulty implementation.

   *  The client MUST verify that the Update Notification File contains
      one contiguous set of Delta File versions after the client's
      current most recent version up to the latest version in the Update
      Notification File.  If the Delta File versions are not contiguous,
      the Update Notification File MUST be rejected.  If the available
      Delta File versions do not range from the client's most recent
      version plus one, the client MUST reinitialize from the snapshot.

   *  The mirror client MUST verify that the hashes of each Delta and
      Snapshot File have not changed compared to the previous valid
      Update Notification File for the same file type and version.  If a
      newer Update Notification File contains a different hash for a
      specific file, this indicates a misconfiguration in the server and
      the client MUST reject the Update Notification File.

   *  The client MUST retrieve all Delta Files for versions since the
      client's last known version, if there are any.

   *  The mirror client MUST verify that the calculated SHA-256 hash of
      each newly downloaded Delta File matches the hash in the Update
      Notification File that referenced it.  If the Delta File was
      compressed with GZIP, the hash MUST match the compressed file.  As
      the Update Notification File is signed, this hash verification
      proves the integrity and authenticity for the Delta File.  In case
      of a mismatch of this hash, the Delta File MUST be rejected.

   *  The client MUST process all changes in the Delta Files in order:
      lowest Delta File version number first, and in the order of the
      changes list in the Delta File.

   *  The client MUST update its records of the most recent version to
      the version of the Update Notification File.

   *  If an Update Notification File or a Delta File has an invalid
      syntax (including missing mandatory parameters), the file MUST be
      rejected.  For validating the IRR objects contained in the files,
      see Section 9.2.

   If the Update Notification File or one of the Delta Files is
   rejected, the mirror client MUST NOT process any newer Deltas than
   those that are valid and have been successfully verified.  If some
   Delta Files are rejected, it MAY process the valid Delta Files, but
   MUST NOT skip over any rejected Delta Files while doing so.
   Additionally, the changes in a specific Delta File MUST be processed
   either completely, or not at all, i.e., a Delta File must never be
   partially processed.

5.5.  Error Recovery

   When a mirror client fails to retrieve any file due to a transient
   error, such as a network failure or an HTTP 5xx response, the client
   SHOULD retry before concluding the retrieval has failed.  It is
   RECOMMENDED that implementations use a bounded exponential backoff
   strategy, starting from a short initial interval (e.g., a few
   seconds) up to a capped maximum interval (e.g., several minutes),
   with a bounded total retry duration.  This prevents unnecessary
   Snapshot imports on clients and can prevent clients overwhelming a
   server on transient failures.  Mirror clients SHOULD log retry and
   recovery events, including the reason, to assist operators in
   diagnosing mirroring failures.

   If a file is rejected, the mirror client MUST NOT load any data from
   it.  If the error may be transient, the mirror client SHOULD retry.
   After exhausting retries, if the required Delta Files remain
   unavailable or are still rejected, the mirror client SHOULD
   reinitialize from the Snapshot File to prevent using stale data.  If
   the Snapshot File itself cannot be retrieved or is rejected after
   retries, as there is no further fallback, the client SHOULD alert the
   operator and stop until the issue is resolved.

5.6.  Signature and Staleness Verification

   Every time a mirror client retrieves a new version of the Update
   Notification File, it MUST verify the included signature.  The
   signature MUST be valid for the configured public key for the
   contents of the Update Notification File.  If the signature does not
   match, the mirror client MUST reject the Update Notification File
   unless a key rotation is in progress as described in Section 9.6.

   A mirror client can use the generation timestamp in the Update
   Notification File to check whether the file is stale, as the mirror
   server must update this file at least every 24 hours.  If the
   generation timestamp is more than 24 hours ago, the file is stale and
   the mirror client SHOULD warn the operator in log messages or other
   alerting, but MAY continue to process it otherwise.

5.7.  Policy Restrictions

   A mirror client MAY have a policy that restricts the processing of
   objects to certain object classes, or other limitations on which
   objects it processes.

   If a mirror client has a policy that restricts object processing,
   this MUST be applied consistently to Snapshot Files and Delta Files
   from the moment the policy is enacted or modified.

6.  Update Notification File

6.1.  Purpose

   The Update Notification File is generated by the mirror server and
   used by mirror clients to discover whether any changes exist between
   the state of the IRR mirror server and of the mirror client.  It also
   describes the location of the Snapshot File and incremental Delta
   Files.  Finally, the generation timestamp can be used to detect
   whether the file is stale.

   The mirror server MUST generate a new Update Notification File every
   time there are new deltas or snapshots and at least every 24 hours,
   even if there have been no changes.

6.2.  Cache Concerns

   A mirror server may use caching infrastructure to cache the Update
   Notification File and reduce the load of HTTPS requests.

   However, since this file is used by mirror clients to determine
   whether any updates are available, the mirror server SHOULD ensure
   that this file is not cached for longer than one minute.  An
   exception to this rule is that it is better to serve a stale Update
   Notification File rather than no Update Notification File.

   Mirror servers SHOULD set the HTTP Cache-Control response header on
   the Update Notification File to no-cache or max-age=60, consistent
   with the one-minute caching limit.  Mirror servers SHOULD set Cache-
   Control: immutable on responses for Snapshot Files and Delta Files,
   as these are immutable for a given session_id and version.
   Otherwise, clients and intermediaries may unnecessarily refetch large
   files.  Mirror clients MAY use HTTP conditional requests (e.g., using
   If-None-Match with ETags or If-Modified-Since) when polling the
   Update Notification File to reduce bandwidth consumption when no
   changes have occurred.

6.3.  Payload Format and Validation

   An example payload of an Update Notification File is provided below:

   {
     "nrtm_version": 4,
     "timestamp": "2025-12-01T15:00:00Z",
     "type": "notification",
     "next_signing_key": "bnJ0..bXY0",
     "source": "EXAMPLE",
     "session_id": "ca128382-78d9-41d1-8927-1ecef15275be",
     "version": 4,
     "snapshot": {
       "version": 3,
       "url":
   "ca128382-78d9-41d1-8927-1ecef15275be/nrtm-snapshot.3.04759.json.gz",
       "hash": "9a..86"
     },
     "deltas": [
       {
         "version": 2,
         "url":
   "ca128382-78d9-41d1-8927-1ecef15275be/nrtm-delta.2.784a2a6.json",
         "hash": "62..a2"
       },
       {
         "version": 3,
         "url":
   "ca128382-78d9-41d1-8927-1ecef15275be/nrtm-delta.3.0f681f0.json",
         "hash": "25..9a"
       },
       {
         "version": 4,
         "url":
   "ca128382-78d9-41d1-8927-1ecef15275be/nrtm-delta.4.d9c194a.json",
         "hash": "b4..13"
       }
     ],
     "metadata": {}
   }

      |  Note: Hash and key values in this example are shortened because
      |  of formatting.

   In this example, the overall version is 4, the snapshot is at version
   3, and deltas are listed for versions 2, 3, and 4.  The deltas at
   versions 2 and 3 predate the snapshot, but are still within the
   24-hour retention window.  A new client would initialize from the
   snapshot at version 3 and then apply only delta 4.  An existing
   client already at version 1 can instead apply deltas 2, 3, and 4
   without reinitializing from the snapshot.

   The following validation rules MUST be observed when creating or
   parsing Update Notification Files:

   *  The nrtm_version MUST be 4.

   *  The timestamp MUST be in the format specified in [RFC3339] with
      the time-offset set to "Z".

   *  The type MUST be "notification".

   *  The optional field next_signing_key is used for in-band key
      rotation.  If present, it MUST be a JWK [RFC7517] public key
      encoded in PEM, which matches the private key the mirror server
      will start using to sign the Update Notification File in the near
      future.  Key rotation is described in Section 9.6.  If there is no
      next signing key, this key MUST be omitted.

   *  The source MUST be a valid IRR object name [RFC2622].

   *  The session_id attribute MUST be a UUIDv4 (Section 5.4 of
      [RFC9562]) unique to this session for this source.

   *  The version MUST be an unsigned positive integer and be equal to
      the highest version of the deltas and snapshot.

   *  The file MUST contain exactly one snapshot.

   *  The file MAY contain one or more deltas.

   *  The deltas MUST have a sequential contiguous set of version
      numbers.

   *  Each snapshot and delta element MUST have a version, URL, and hash
      attribute.  The URL must be relative to the path of the Update
      Notification File.  For example, if the Update Notification File
      example above is published on https://example.com/nrtm/update-
      notification-file.jose, the full URL for the referred snapshot is
      https://example.com/nrtm/ca128382-78d9-41d1-8927-1ecef15275be/
      nrtm-snapshot.3.04759.json.gz.  If the snapshot or delta file was
      compressed with GZIP, the filename MUST end in ".gz", and the hash
      MUST match the compressed data.

   *  The hash attribute in snapshot and delta elements MUST be the
      hexadecimal encoding of the SHA-256 hash of the referenced file.
      This hash algorithm, used to verify the integrity of the Snapshot
      and Delta Files, is fixed and independent of the JWS signing
      algorithm used for the Update Notification File.  The mirror
      client MUST verify this hash when the file is retrieved and reject
      the file if the hash does not match.

   *  The metadata key MAY be present and is used for metadata produced
      by the server to aid in tracing and debugging.  This can contain
      information like the name of the host on which the file was
      generated or the name and version of the software used.  Each
      mirror server may choose which fields to include or choose to not
      include any metadata.  The mirror server SHOULD NOT cause
      excessive size increases by adding extensive metadata in the
      Update Notification File, as it is the most frequently retrieved
      file.

6.4.  Encoding and Signature

   *  The actual Update Notification File content is a JSON Web
      Signature [RFC7515] using JWS Compact Serialization.

   *  The JWS Payload is the JSON [RFC8259] serialization of the
      structure described in the previous section.

   *  The filename of the serialized data MUST be "update-notification-
      file.jose".

   *  Mirror clients MUST implement ES256.  Mirror servers MAY use ES256
      or other digital signature algorithms from the IANA "JSON Web
      Signature and Encryption Algorithms" registry [IANA_jose]; the
      algorithm MUST NOT be "none", a MAC algorithm, or Deprecated or
      Prohibited.  It is RECOMMENDED to use ES256 or other Recommended
      or Recommended+ algorithms.  If a server uses an algorithm other
      than ES256, it is the server operator's responsibility to ensure
      their mirror clients support that algorithm.

7.  Snapshot File

7.1.  Purpose

   The Snapshot File reflects the complete and current contents of all
   IRR objects in an IRR Database.  Mirror clients MUST use this to
   initialize their local copy of the IRR Database.  Snapshot Files are
   not individually signed.  Their integrity is verified by comparing
   the calculated SHA-256 hash with the hash listed in the signed Update
   Notification File (see Section 6.4).

7.2.  Cache Concerns

   A snapshot reflects the content of the IRR Database at a specific
   point in time; for that reason, it can be considered immutable data.
   Snapshot Files are published at a URL that is unique to the specific
   session and version.  The URL also contains a random value that can
   not be predicted before publication to counter negative caching
   issues.

   Because these files never change, they can be cached.  However, as
   snapshots are large and old snapshots will no longer be referred by
   newer Update Notification Files, it is RECOMMENDED that a limited
   cache interval is used.

7.3.  File Format and Validation

   Example Snapshot File, where ␞ (U+241E) represents the record
   separator control character (U+001E) as specified in [RFC7464]:

   ␞{
     "nrtm_version": 4,
     "type": "snapshot",
     "source": "EXAMPLE",
     "session_id": "ca128382-78d9-41d1-8927-1ecef15275be",
     "version": 3
   }
   ␞{"object": "route: 192.0.2.0/24\norigin: AS64500\nsource: EXAMPLE"}
   ␞{"object": "route6: 2001:db8::/32\norigin: AS64500\nsource: EXAMPLE"}

      |  Note: IRR object texts in this example are shortened because of
      |  formatting.

   The file is in JSON Text Sequences [RFC7464] format and MUST contain
   one or more records (it must contain at least the header).  The first
   record is the file header and the following validation rules MUST be
   observed when creating or parsing a Snapshot File header:

   *  The nrtm_version MUST be 4.

   *  The type MUST be "snapshot".

   *  The source MUST match the source in the Update Notification File.

   *  The session_id attribute MUST match the session_id in the Update
      Notification File.

   *  The version MUST be an unsigned positive integer, matching the
      Update Notification File entry for this snapshot.

   The remaining records (zero or more) MUST each contain a string
   representation of an IRR object.  The source attribute in the IRR
   object texts MUST match the source attribute of the Snapshot File.

8.  Delta File

8.1.  Purpose

   A Delta File contains all changes for exactly one incremental update
   of the IRR Database.  It may include new, modified, and deleted
   objects.  Delta Files can contain multiple alterations to multiple
   objects.  Delta Files are not individually signed.  Their integrity
   is verified by comparing the calculated SHA-256 hash with the hash
   listed in the signed Update Notification File (see Section 6.4).

8.2.  Cache Concerns

   Deltas reflect the difference in content of the IRR Database from one
   version to another; for that reason, it can be considered immutable
   data.  Delta Files are published at a URL that is unique to the
   specific session and version.  The URL also contains a random value
   that can not be predicted before publication to counter negative
   caching issues.

   To avoid race conditions where a mirror client retrieves an Update
   Notification File moments before it's updated, mirror servers SHOULD
   retain old Delta Files for at least 5 minutes after a new Update
   Notification File is published that no longer contains these Delta
   Files.

8.3.  File Format and Validation

   Example Delta File, where ␞ (U+241E) represents the record separator
   control character (U+001E) as specified in [RFC7464]:

   ␞{
     "nrtm_version": 4,
     "type": "delta",
     "source": "EXAMPLE",
     "session_id": "ca128382-78d9-41d1-8927-1ecef15275be",
     "version": 3
   }
   ␞{
     "action": "delete",
     "object_class": "person",
     "primary_key": "PRSN1-EXAMPLE"
   }
   ␞{
     "action": "delete",
     "object_class": "route",
     "primary_key": "192.0.2.0/24AS64500"
   }
   ␞{
     "action": "add_modify",
     "object": "route6: 2001:db8::/32\norigin: AS64500\nsource: EXAMPLE"
   }

      |  Note: IRR object texts in this example are shortened because of
      |  formatting.

   The file is in JSON Text Sequences [RFC7464] format and MUST contain
   two or more records (at least the header and one change).  The first
   record is the file header and the following validation rules MUST be
   observed when creating or parsing a Delta File header:

   *  The nrtm_version MUST be 4.

   *  The type MUST be "delta".

   *  The source MUST match the source in the Update Notification File.

   *  The session_id attribute MUST match the session_id in the Update
      Notification File.

   *  The version MUST be an unsigned positive integer, matching the
      Update Notification File entry for this delta.

   The remaining records (one or more) MUST each contain a JSON object
   that represents a change.  The JSON object MUST meet the following
   rules:

   *  It has an "action" attribute, which is either "delete" for object
      deletions or "add_modify" for additions or modifications.

   *  If action is "delete": It has an "object_class" attribute with the
      RPSL object class name, and a "primary_key" attribute with the
      primary key of the deleted object.  For objects that are listed in
      [RFC2622] and [RFC4012], the primary key is the value of the RPSL
      field defined as "class key".  For object classes that define a
      pair of attributes as class key, e.g. route, the values of the
      individual attributes are appended together without separators.
      For any other objects, the primary key is the value of the RPSL
      field with the same name as the object class name.  The primary
      key and object class name are not case-sensitive.  Therefore,
      mirror clients MUST use case-insensitive matching against their
      local database.

   *  If action is "add_modify": It has an "object" attribute with the
      RPSL text of the new version of the object.

9.  Operational Considerations

9.1.  Time

   IRR clients and servers are RECOMMENDED to use NTP [RFC5905]
   synchronization to avoid timing discrepancies.

9.2.  IRR Object Validation

   Throughout the years, various implementations of IRR servers have
   taken liberties with the various RFCs regarding RPSL.
   Implementations have introduced different new object classes,
   attributes, and validation rules.  Current IRR Databases also contain
   legacy objects that were created under different validation rules.
   In practice, there is no uniformly implemented standard for RPSL, but
   merely rough outlines partially documented in different places.

   This has the potential to create interoperability issues.  Some are
   addressed by NRTMv4, like having a consistent character set when
   mirroring data between implementations.  However, some issues can not
   be addressed in this way, such as one implementation introducing a
   new object class that is entirely unknown to another implementation.

   A mirror client SHOULD be able to handle unknown object classes and
   objects that are invalid according to its own validation rules, which
   may mean simply discarding them without rejecting remaining objects
   or preventing future updates.

   It is RECOMMENDED for mirror clients to log these cases, particularly
   those where an object was discarded due to violating validation
   rules.  These cases create an inconsistency between the IRR objects
   of the server and client, and logs facilitate later analysis.

   It is recommended for mirror clients to be flexible where possible
   and reasonable when applying their own validation rules to IRR
   objects retrieved from mirror servers.  For example, a route object
   with an origin attribute that is not a valid AS number can't be
   usefully interpreted.  There is no way for an IRR server to correctly
   parse and index such an object.  However, a route-set object whose
   name does not start with "RS-" [RFC2622], or an inetnum with an
   unknown extra "org" attribute, still allows the mirror client to
   interpret it unambiguously even if it does not meet the mirror
   client's own validation rules for authoritative records.

9.3.  Intermediate Mirror Instances

   An IRR Database generally has a single authoritative source.  In some
   cases, an instance run by a third party will function as a kind of
   intermediate: both being a mirror client, mirroring IRR objects from
   the authoritative source, and simultaneously functioning as a mirror
   server to yet another mirror client.

   There are various operational reasons for such a setup, such as the
   intermediate filtering certain records.  Regardless of the reason,
   the mirror client and server function of an IRR server must be
   treated as separate processes.  In particular, this means they MUST
   have separate session IDs.  The intermediate server MUST NOT
   republish the same files it retrieved from the authoritative source
   with the same session ID.

9.4.  Reading from Local Files

   In the typical use case for NRTMv4, a mirror client retrieves files
   from an HTTPS endpoint.  However, implementations MAY also support
   reading from files on the local filesystem instead for when operators
   want to use a different method to retrieve or distribute the files.
   When reading from local files, mirror clients SHOULD still follow all
   validation rules, including the validation of the signature and
   hashes, to prevent corrupted or tampered data from being loaded.

9.5.  Storage Considerations

   After publishing a new Update Notification File and absent local
   policy, a mirror server SHOULD remove any Snapshot and Delta Files
   that are no longer referenced, as unreferenced files consume storage
   unnecessarily.  To avoid race conditions where a mirror client
   retrieves an Update Notification File moments before it is updated,
   mirror servers SHOULD retain unreferenced files for at least 5
   minutes after a new Update Notification File is published.

9.6.  Public Key Rotation

   It is recommended that the IRR Database operators rotate the signing
   key on their mirror server with a frequency that is not disruptive to
   operations but preserves the familiarity of the practices to
   accomplish key rotation.  Many organizations have settled on annual
   cycles.  The next_signing_key field in the Update Notification File
   supports in-band key rotation using the following process:

   *  The server operator generates a new key and configures this in the
      mirror server implementation as the upcoming new signing key.

   *  The mirror server MUST include this key in the next_signing_key
      field in any Update Notification File generated while the new
      signing key is configured.  Hence, the new signing key will start
      being propagated to the mirror clients with the next publication
      of the Notification File, which will take at most 24 hours.
      Mirror server implementations MAY offer a method to cause the
      Update Notification File to be refreshed earlier, with the
      next_signing_key included, and thus start the propagation earlier.

   *  When mirror clients retrieve the Update Notification File next,
      they MUST detect the next_signing_key field and store the key in
      their configuration.

   *  After allowing mirror clients time to have seen the new Update
      Notification File with the next_signing_key field, the mirror
      server operator configures the new key as the currently active key
      and removes the old key.  Any Update Notification File generated
      after this point MUST be signed with this new key and will not
      contain a next_signing_key field.

   *  The RECOMMENDED period between publication of the upcoming key in
      the next_signing_key field and removal of the old key is one week.
      This offers all active clients a reasonable chance to follow the
      rotation process.

   *  When mirror clients retrieve an Update Notification File and find
      that the signature does not match, they MUST attempt to verify
      against a next_signing_key encountered in a previous (valid) file.
      If the signature matches for this new key, the client MUST update
      its configuration to use the new key for validation.  After this,
      the client MUST NOT use the old key for validation at any time; a
      mirror server cannot switch back to an old key.

   If a mirror client never retrieves an Update Notification file at any
   point during the rotation process, it will no longer be able to
   verify the signature.  In that scenario manual recovery is required,
   similar to a first time configuration of a new mirror client.

9.7.  Scalability

   As NRTMv4 uses HTTPS for all file retrieval, mirror servers can use
   standard HTTP caching infrastructure, horizontal scaling, and CDN
   integration to handle load.  Caching considerations for each file
   type are discussed in the respective Cache Concerns sections.

   Delta Files are typically small, as they only contain changes since
   the previous version.  Snapshot Files can be larger, but all files
   may be compressed with GZIP to reduce storage and bandwidth
   requirements.

9.8.  NRTMv3 Compatibility

   NRTMv4 is a new protocol that is not backwards compatible with
   NRTMv3.  There is no migration path between the two protocols;
   operators wishing to support both can run them in parallel.

10.  IANA Considerations

   This document has no IANA actions.

11.  Security Considerations

   IRR objects serve many purposes, including automated network
   configuration and filtering.  Manipulation of IRR objects can
   therefore have a significant security impact.  However, security in
   existing protocols is mostly absent.

   Before NRTMv4, the most common protocols for IRR Database mirroring
   are FTP for retrieving full snapshots and NRTM version 3 for
   retrieving later changes.  There are no provisions for integrity or
   authenticity and there are various scenarios where mirroring may not
   be reliable.

   NRTMv4 requires integrity verification.  The Update Notification File
   is signed and clients must verify its signature.  The signed Update
   Notification File contains SHA-256 hashes of all Delta and Snapshot
   Files, which clients must verify through calculating and comparing
   hashes on retrieval.  Together, the signature and hash verification
   form a chain of trust from the signing key to each individual file.
   Additionally, the channel security offered by HTTPS further limits
   security risks.

   By allowing publication on any HTTPS endpoint, NRTMv4 allows for
   extensive scaling and there are many existing techniques and services
   to protect against denial-of-service attacks.  In contrast, NRTMv3
   required mirror clients to directly query the IRR server instance
   with special WHOIS queries.  This scales poorly and there are no
   standard protections against denial-of-service available.

   Since Snapshot and Delta Files may be compressed with GZIP, a
   maliciously crafted compressed file could expand to a much larger
   size than expected, potentially exhausting memory or disk resources.
   Implementations SHOULD enforce limits on the decompressed size of
   files relative to the compressed size or the expected data volume for
   the IRR Database.  See also the security considerations of [RFC6713].

   The HTTPS endpoint used for NRTMv4 MUST be configured according to
   the best practices in [BCP195].  Mirror clients MUST NOT use other
   protocols than HTTPS, such as HTTP or FTP.

12.  References

12.1.  Normative References

   [BCP195]   Best Current Practice 195,
              <https://www.rfc-editor.org/info/bcp195>.
              At the time of writing, this BCP comprises the following:

              Moriarty, K. and S. Farrell, "Deprecating TLS 1.0 and TLS
              1.1", BCP 195, RFC 8996, DOI 10.17487/RFC8996, March 2021,
              <https://www.rfc-editor.org/info/rfc8996>.

              Sheffer, Y., Saint-Andre, P., and T. Fossati,
              "Recommendations for Secure Use of Transport Layer
              Security (TLS) and Datagram Transport Layer Security
              (DTLS)", BCP 195, RFC 9325, DOI 10.17487/RFC9325, November
              2022, <https://www.rfc-editor.org/info/rfc9325>.

              Salz, R. and N. Aviram, "New Protocols Using TLS Must
              Require TLS 1.3", BCP 195, RFC 9852, DOI 10.17487/RFC9852,
              July 2026, <https://www.rfc-editor.org/info/rfc9852>.

   [IANA_jose]
              IANA, "JSON Object Signing and Encryption (JOSE)",
              <https://www.iana.org/assignments/jose>.

   [RFC1952]  Deutsch, P., "GZIP file format specification version 4.3",
              RFC 1952, DOI 10.17487/RFC1952, May 1996,
              <https://www.rfc-editor.org/info/rfc1952>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC2622]  Alaettinoglu, C., Villamizar, C., Gerich, E., Kessens, D.,
              Meyer, D., Bates, T., Karrenberg, D., and M. Terpstra,
              "Routing Policy Specification Language (RPSL)", RFC 2622,
              DOI 10.17487/RFC2622, June 1999,
              <https://www.rfc-editor.org/info/rfc2622>.

   [RFC3339]  Klyne, G. and C. Newman, "Date and Time on the Internet:
              Timestamps", RFC 3339, DOI 10.17487/RFC3339, July 2002,
              <https://www.rfc-editor.org/info/rfc3339>.

   [RFC4012]  Blunk, L., Damas, J., Parent, F., and A. Robachevsky,
              "Routing Policy Specification Language next generation
              (RPSLng)", RFC 4012, DOI 10.17487/RFC4012, March 2005,
              <https://www.rfc-editor.org/info/rfc4012>.

   [RFC7464]  Williams, N., "JavaScript Object Notation (JSON) Text
              Sequences", RFC 7464, DOI 10.17487/RFC7464, February 2015,
              <https://www.rfc-editor.org/info/rfc7464>.

   [RFC7468]  Josefsson, S. and S. Leonard, "Textual Encodings of PKIX,
              PKCS, and CMS Structures", RFC 7468, DOI 10.17487/RFC7468,
              April 2015, <https://www.rfc-editor.org/info/rfc7468>.

   [RFC7515]  Jones, M., Bradley, J., and N. Sakimura, "JSON Web
              Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May
              2015, <https://www.rfc-editor.org/info/rfc7515>.

   [RFC7517]  Jones, M., "JSON Web Key (JWK)", RFC 7517,
              DOI 10.17487/RFC7517, May 2015,
              <https://www.rfc-editor.org/info/rfc7517>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8259]  Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
              Interchange Format", STD 90, RFC 8259,
              DOI 10.17487/RFC8259, December 2017,
              <https://www.rfc-editor.org/info/rfc8259>.

   [RFC9562]  Davis, K., Peabody, B., and P. Leach, "Universally Unique
              IDentifiers (UUIDs)", RFC 9562, DOI 10.17487/RFC9562, May
              2024, <https://www.rfc-editor.org/info/rfc9562>.

   [SHS]      NIST, "Secure Hash Standard (SHS)", NIST FIPS 180-4,
              DOI 10.6028/NIST.FIPS.180-4, August 2015,
              <https://nvlpubs.nist.gov/nistpubs/FIPS/
              NIST.FIPS.180-4.pdf>.

   [STD97]    Internet Standard 97,
              <https://www.rfc-editor.org/info/std97>.
              At the time of writing, this STD comprises the following:

              Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke,
              Ed., "HTTP Semantics", STD 97, RFC 9110,
              DOI 10.17487/RFC9110, June 2022,
              <https://www.rfc-editor.org/info/rfc9110>.

12.2.  Informative References

   [NRTMv3]   RIPE NCC, "Access to NRTM", March 2026,
              <https://docs.db.ripe.net/RIPE-Database-Mirror/Access-to-
              NRTM/>.

   [RFC5905]  Mills, D., Martin, J., Ed., Burbank, J., and W. Kasch,
              "Network Time Protocol Version 4: Protocol and Algorithms
              Specification", RFC 5905, DOI 10.17487/RFC5905, June 2010,
              <https://www.rfc-editor.org/info/rfc5905>.

   [RFC6713]  Levine, J., "The 'application/zlib' and 'application/gzip'
              Media Types", RFC 6713, DOI 10.17487/RFC6713, August 2012,
              <https://www.rfc-editor.org/info/rfc6713>.

   [RFC8182]  Bruijnzeels, T., Muravskiy, O., Weber, B., and R. Austein,
              "The RPKI Repository Delta Protocol (RRDP)", RFC 8182,
              DOI 10.17487/RFC8182, July 2017,
              <https://www.rfc-editor.org/info/rfc8182>.

Acknowledgments

   The authors would like to thank George Michaelson, Shon Huang, Tim
   Bruijnzeels, Mahesh Aggarwal, Fedor Vompe, Paul Etchells, and Mohamed
   Boucadair for their helpful review of this document and/or work on
   implementations.  The authors would also like to thank Daniele
   Ceccarelli, Claudio Allocchio, Menachem Dodge, Julian Reschke, Watson
   Ladd, and Paul Kyzivat for their reviews during IETF Last Call.  The
   authors thank Gorry Fairhurst, Andy Newton, Éric Vyncke, Mike Bishop,
   Deb Cooley, Roman Danyliw, Mahesh Jethanandani, Ketan Talaulikar,
   Gunter Van de Velde, Christopher Inacio, Jim Guichard, and Tommy
   Jensen for the reviews and feedback.

Authors' Addresses

   Sasha Romijn
   Reliably Coded
   Amsterdam
   Netherlands
   Email: sasha@reliablycoded.nl
   URI:   https://www.reliablycoded.nl/


   Job Snijders
   BSD Software Development
   Amsterdam
   Netherlands
   Email: job@bsd.nl
   URI:   https://www.bsd.nl/


   Edward Shryane
   RIPE NCC
   Amsterdam
   Netherlands
   Email: eshryane@ripe.net


   Stavros Konstantaras
   AMS-IX
   Amsterdam
   Netherlands
   Email: stavros.konstantaras@ams-ix.net
Contents 53
  1. Abstract
  2. Status of This Memo
  3. Copyright Notice
  4. Table of Contents
  5. 1 Introduction
  6. 2 Overview
  7. 3 Terminology
  8. 3.1 Requirements Language
  9. 4 Mirror Server Use
  10. 4.1 Key Configuration
  11. 4.2 Snapshot Initialization
  12. 4.3 Publishing Updates
  13. 4.3.1 Delta Files
  14. 4.3.2 Snapshot Files
  15. 4.3.3 Update Notification File
  16. 4.3.4 Publication Policy Restrictions
  17. 5 Mirror Client Use
  18. 5.1 Client Configuration
  19. 5.2 Update Notification File Retrieval
  20. 5.3 Initialization from Snapshot
  21. 5.4 Processing Delta Files
  22. 5.5 Error Recovery
  23. 5.6 Signature and Staleness Verification
  24. 5.7 Policy Restrictions
  25. 6 Update Notification File
  26. 6.1 Purpose
  27. 6.2 Cache Concerns
  28. 6.3 Payload Format and Validation
  29. 6.4 Encoding and Signature
  30. 7 Snapshot File
  31. 7.1 Purpose
  32. 7.2 Cache Concerns
  33. 7.3 File Format and Validation
  34. 8 Delta File
  35. 8.1 Purpose
  36. 8.2 Cache Concerns
  37. 8.3 File Format and Validation
  38. 9 Operational Considerations
  39. 9.1 Time
  40. 9.2 IRR Object Validation
  41. 9.3 Intermediate Mirror Instances
  42. 9.4 Reading from Local Files
  43. 9.5 Storage Considerations
  44. 9.6 Public Key Rotation
  45. 9.7 Scalability
  46. 9.8 NRTMv3 Compatibility
  47. 10 IANA Considerations
  48. 11 Security Considerations
  49. 12 References
  50. 12.1 Normative References
  51. 12.2 Informative References
  52. Acknowledgments
  53. Authors' Addresses